A rough guide based off the WSM
- Difficulty Level:
Engine Cover - Remove
Fuel Return Hose - Disconnect
You may need to remove Exhaust Joint Pipe and Exhaust Pipe A - Remove (N16A4 engine) but you can over come this with your own ingenuity you will soon figure out there is no need to remove the exhaust pipe and correct tools you will figure it out.
Fuel Filter Water Level Sensor Connector - Disconnect
Fuel Filter - Water Bleed
Fuel Filter - Remove
Pull out the fuel filter (A) from the rubber mount (B) as shown.
Disconnect the hoses (C), then remove the fuel filter
Fuel Filter Water Level Sensor - Remove