i-CTDi Honda Accord Normal Conditions Maintenance Schedule

Honda Accord 2004-2008 [CN1, CN2]

  1. Ichiban
    Follow the Normal Conditions Maintenance Schedule if the severe driving
    conditions specified in the Severe Conditions Maintenance Schedule do not apply.
    Service at the indicated distance or time whichever comes firstkm x 1,00020406080100120140160180200220240
    miles x 1,00012.525.037.550.062.575.087.5100.0112.5125.0137.5150.0
    months1224364860728496108120132144
    Replace engine
    oil
    Replace engine
    oil filter
    Replace air cleaner elementEvery 40,000 km (25,000 miles)
    Drain fuel
    filter
    Replace fuel
    filter Bosch Replace fuel filter Denso
    Inspect drive belts



    • Check for cracks and damage

    • Check deflection and tension
    Replace engine coolant

    Use genuine Honda All Season Antifreeze/ Coolant Type 2
    Replace manual transmission fluid

    Use genuine Honda MTF
    Every 120,000 km (75,000 miles) or 8 years
    Inspect front and rear brakes



    • Check the brake pad and disc thickness. Check for damage or cracks front pad, front disc,rear disc [/URL]

    • Check the brake linings for cracking, grazing, wear, and contamination

    • Check the calipers for damage, leaks, and tightness
    Replace brake
    fluid




    • Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid

    • Check that brake fluid level between the upper and lower marks on the
      reservoir
    Every 3 years
    Check parking brake adjustment

    Check the parking brake operation
    Replace dust and pollen filter

    Replace every 20,000 km (12,500 miles) or 1 year when the customer
    drives primarily in urban areas that have high concentrations of soot in the
    air, under dusty conditions, or the air flow from the heating and cooling
    system becomes less than normal.






    Service at the indicated distance or time whichever comes firstkm x 1,00020406080100120140160180200220240
    miles x 1,00012.525.037.550.062.575.087.5100.0112.5125.0137.5150.0
    months1224364860728496108120132144
    Check lights alignment

    Check the position of the headlights
    Check expiry date for temporary repair kit bottle
    Test drive (noise, stability, dashboard operation)
    Inspect vehicle corrosion: refer to the Body Repair Manual



    • External Paintwork and panel Corrosion Check

    • Under body Corrosion Check
    Every year
    Visually inspect the following items:



    • Check for correct installation and position, check for cracks,
      deterioration, rust, and leaks

    • Check tightness of screws, nuts, and joints. If necessary, retighten
    Tie-rod ends, steering gearbox, and boots

    Check rack grease and steering linkage. Check the boot for damage and
    leaking grease
    Suspension components


    Driveshaft boots [/URL]



    • Check the boot and boot band for cracks

    • Check rack grease
    Brake hoses and lines (including VSA)

    Check the master cylinder and VSA modulator-control unit and leakage
    All fluid levels and condition of fluids

    Check levels and check for leaks. If necessary, add engine coolant, MTF, brake fluid,power steering fluid ,
    and windshield fluid
    [Exhaust system


    Check the catalytic converter heat shield, exhaust pipe, and muffler
    for damage, leaks, and tightness
    Fuel lines and connections

    Check fuel lines for loose connections, cracks, and deterioration.
    Retighten loose connections and replace any damaged parts
    Tyre condition