i-DTEC Diesel Maintenance Schedule for Normal Conditions (N22B1/N22B2)

Accord 08-14 [ CU3 & CW3]

  1. Ichiban
    Difficulty Level:
     
    Simple
    Follow the normal maintenance schedule if the severe driving conditions specified in the severe maintenance schedule do not apply.
    Service at the indicated distance or time whichever comes firstx 1,000 km20406080100120140160180200220240
    x 1,000 miles12.525.037.550.062.575.087.5100.0112.5125.0137.5150.0
    months1224364860728496108120132144
    Replace engine oil
    Replace engine oil filter
    Replace air cleaner elementEvery 60,000 km (37,500 miles)
    Replace fuel filter
    ·M/T
    ·A/T
    Inspect drive belt
    -Look for cracks and damage, then check the position of drive belt auto-tensioner indicator.
    Replace engine coolant
    -We recommend genuine Honda All Season Antifreeze/Coolant Type 2.
    Replace Manual Transmission Fluid
    -We recommend genuine Honda MTF.
    Every 120,000 km (75,000 miles) or 8 years
    Replace Automatic Transmission Fluid
    -We recommend genuine Honda ATF DW-1.
    At 120,000 km (75,000 miles) or 8 years, thereafter every 80,000 km (50,000 miles) or 4 years
    Check front and rear brakes
    Check brake pads and disc thickness. Check for damage.
    Check calipers for damage, leaks, and tightness.
    Check parking brake linings for cracking, glazing, wear, and for oil or grease contamination.
    Replace brake fluid
    Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid.
    Check brake fluid level is between upper and lower marks on reservoir.
    Every 3 years
    Check parking brake adjustment
    -Check parking brake operation.
    Replace dust and pollen filter
    If the vehicle is driven mostly in areas that have high concentrations of dust, pollen, or soot in the air, replace every 20,000 km (12,500 miles) or 1 year.
    Replace filter whenever airflow from heating and air conditioning system is less than normal.
    Check lights alignment
    -Check the position of headlights.
    Test drive (noise, stability, dashboard operation)
    Check expiration date for temporary tyre repair kit bottle (if equipped)
    Inspect vehicle corrosion: refer to the Body Repair Manual
    External Paintwork and Panel Corrosion Check
    Under Body Corrosion Check
    Every year
    Service at the indicated distance or time whichever comes firstx 1,000 km20406080100120140160180200220240
    x 1,000 miles12.525.037.550.062.575.087.5100.0112.5125.0137.5150.0
    months1224364860728496108120132144
    Visually inspect the following items:
    Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
    Check tightness of screws, nuts, and joints. If necessary, retighten.
    Tie-rod ends, steering gearbox, and boots
    Check steering linkage.
    Check boots for damage and leaking grease.
    Suspension components
    Check bolts for tightness.
    Check all dust covers for deterioration and damage.
    Sedan:
    ·Front
    ·Rear
    Station wagon:
    ·Front
    ·Rear
    Driveshaft boots
    Check boots and boot bands for cracks.
    Check boots for leaking grease.
    Brake hoses and lines including VSA lines
    -Check master cylinder and VSA modulator-control unit and leakage.
    All fluid levels and condition of fluids
    -Check levels and check for leaks. If necessary, add.
    ·Engine coolant
    ·MTF
    ·ATF
    ·Brake fluid
    ·Clutch fluid
    ·Windshield washer fluid
    Exhaust system
    -Check exhaust pipe and muffler for damage, leaks, and tightness.
    ·M/T
    ·A/T
    Fuel lines
    ·M/T
    ·A/T
    and connections
    ·M/T
    ·A/T
    Check fuel lines for loose connections, cracks, and deterioration.
    Retighten loose connections and replace any damaged parts.
    Tyre condition