Jacking Up and Supporting Safely

Stream 00-06 [RN1, RN3]

  1. Ichiban
    Difficulty Level:
    Frame Hoist or Four Post Lift
    Hoisting the car on four post lift or resting the Axel stands.
    • Position the hoist lift blocks (A), or safety stands, under the vehicle's front support points (B) and rear support points (C).
    HK Stream1 Lift.PNG
    • Raise the hoist a few inches, and rock the vehicle gently to be sure it is firmly supported.
    • Raise the hoist to full height, and inspect the lift points for solid contact with the lift blocks.
    NOTE: If you are going to remove heavy components such as suspension or the fuel tank from the rear of the vehicle, first support the front of the vehicle with tall safety stands. When substantial weight is removed from the rear of the vehicle, the center of gravity can change and cause the vehicle to tip forward on the hoist.
    High Lift Floor Jack
    • Block the rear wheels when raising the front of the vehicle; block the front wheels when raising the rear of the vehicle.
    HK Stream2 Lift.PNG
    • Place the blocks behind and ahead of the wheels.
    • Raise the vehicle high enough to insert the safety Axel stands.
    • Adjust and place the safety stands so the vehicle will be approximately level, then lower the vehicle onto them.