NEVERLAND H4 HB2 LED Headlight Conversion Driving lamp Bulbs Clear 6000k True White Light Hi/Lo Beam 90W 9600LM
- Difficulty Level:
Fitted and here's how it was done.
Started with the off side first and to give access I removed the earth lead and the undone the header tank bolts to allow it to be moved to one side.
I then unplugged original bulb,removed dust cap and removed bulb by unclipping the spring retainer.
You then need to unscrew the collar from the LED bulb and insert the collar where you have removed the original bulb from.
Because the LED bulbs can be adjusted by screwing the bulb body in and out, there is a Allen screw bolt in the collar you are supposed to use to fix the bulb into the collar when in place. But once the collar is in place in the head lamp you can not get to this so I had to wrap some insulation tape around the bulb and part of the thread to create a tolerance fit.
Before fitting the LED bulb remember to slide it through the rubber gaiter.
You now insert the bulb through the hole in the collar and screw it into position, I found sitting the rubber gaiter home first made screwing it in easier.
I have screwed mine in so the blanking plate is at the bottom with the threads of the bulb just showing through the collar.
Now connect the bulb lead to the original bulb lead.
Re fit the header tank and earth lead and test bulb.
The operation is pretty much the same for the other side but there was no need to remove anything as access to the bulb was a lot easier.