Maintenance Schedule for Normal Conditions(EU)

S2000 00-09 [AP1]

  1. Ichiban

    Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply


    Service at the indicated distance or time whichever comes first

    km x 1,000

    15

    30

    45

    60

    75

    90

    105

    120

    135

    150

    165

    miles x 1,000

    9

    18

    27

    36

    45

    54

    63

    72

    81

    90

    99

    months

    12

    24

    36

    48

    60

    72

    84

    96

    108

    120

    132

    Replace engine oil and oil filter












    Replace air cleaner element




    Inspect valve clearance
    • Check the valve clearance.




    Replace fuel filter


    Replace spark plugs


    Inspect drive belts
    • Check for cracks and damage.
    • Check deflection and tension.




    Inspect idle speed


    Replace engine coolant
    • Check specific gravity for freezing point.




    Replace transmission fluid
    • Genuine Honda MTF.


    Inspect transmission fluid


    Replace differential fluid
    • Hypoid gear oil
    • API Classification GL5 or GL6, Viscosity: SAE 90




    Inspect front and rear brakes
    • Check the brake pad and disc thickness. Check for damage or cracks.
    • Check the calipers for damage, leaks, and tightness.












    Replace brake fluid
    • Use only DOT 3 or DOT 4 brake fluid. We recommend Genuine Honda Brake Fluid.
    • Check that brake fluid level is between upper and lower marks on the reservoir.

    Every 3 years

    Check parking brake adjustment
    • Check the parking brake operation.







    Replace pollen filter

    Every 30,000 km (18,000 miles) or 12 months

    Check light alignment
    • Check the position of the headlight.












    Test drive
    • Check for road stability, noise, vibrations and dashboard operation.












    Visually inspect the following items:
    • Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
    • Check tightness of screws, nuts, and joints. If necessary, retighten.

    Tie rod ends, steering gearbox, and boots
    • Check rack grease and steering linkage.
    • Check the boot for damage and leaking grease.












    Suspension components
    • Check the bolts for tightness.
    • Check all dust cover for deterioration and damage.

    Driveshaft boots
    • Check the boot and boot band for cracks.
    • Check rack grease.

    Brake hoses and lines (including ABS)
    • Check the master cylinder, proportioning control valve and ABS modulator for damage and leakage.

    Exhaust system
    • Check the catalytic converter heat shield, exhaust pipe and muffler for damage, leaks and tightness.

    Fuel lines and connections
    • Check fuel lines for loose connections, cracks and deterioration. Retighten loose connections and replace any damaged parts.

    Tyre condition
    • Check for pressure, puncture or cuts and irregular thread wear.