Maintenance Schedule for Severe Conditions(EU)

S2000 00-09 [AP1]

  1. Ichiban

    Service at the indicated distance or time whichever comes first

    km x 1,000

    7.5

    15

    22.5

    30

    37.5

    45

    52.5

    60

    67.5

    75

    82.5

    90

    97.5

    105

    112.5

    120

    miles x 1,000

    4.5

    9

    13.5

    18

    22.5

    27

    31.5

    36

    40.5

    45

    49.5

    54

    58.5

    63

    67.5

    72

    months

    6

    12

    18

    24

    30

    36

    42

    48

    54

    60

    66

    72

    78

    84

    90

    96

    Replace engine oil and oil filter

















    Replace air cleaner element
    • Use normal schedule except in dusty conditions.






    Inspect valve clearance
    • Check valve clearance.



    Replace fuel filter


    Replace spark plugs


    Inspect drive belts
    • Check for cracks and damage.
    • Check deflection and tension.



    Inspect idle speed


    Replace engine coolant
    • Check specific gravity for freezing point.



    Replace transmission fluid
    • Genuine Honda MTF



    Replace differential fluid
    • Hypoid gear oil
    • API Classification GL5 or GL6,
      Viscosity: SAE 90





    Inspect front and rear brakes
    • Check the brake pad and disc thickness.
    • Check for damage or cracks.
    • Check the calipers for damage, leaks, and tightness.

















    Replace brake fluid
    • Use only DOT 3 or DOT 4 brake fluid. We recommend Genuine Honda Brake Fluid.
    • Check that brake fluid level is between upper and lower marks on the reservoir.

    Every 3 years

    Check parking brake adjustment
    • Check the parking brake operation.






    Replace pollen filter

    Every 30,000 km (18,000 miles) or 12 months

    Check lights alignment
    • Check the position of the headlight.









    Test drive
    • Check for road stability, noise, vibrations and dashboard operation.









    Visually inspect the following items:
    • Check for correct installation and position, check for cracks, deterioration, rust, and leaks.
    • Check tightness of screws, nuts, and joints. If necessary, retighten.

    Tie rod ends, steering gearbox, and boots
    • Check rack grease and steering linkage.
    • Check the boot for damage and leaking grease.

















    Suspension components
    • Check the bolts for tightness.
    • Check all dust cover for deterioration and damage.

    Driveshaft boots
    • Check the boot and boot band for cracks.
    • Check rack grease.

    Brake hoses and lines (including ABS)
    • Check the master cylinder, proportioning control valve and ABS modulator for damage and leakage.









    Exhaust system
    • Check the catalytic converter heat shield, exhaust pipe and muffler for damage, leaks and tightness.

    Fuel lines and connections
    • Check fuel lines for loose connections, cracks and deterioration. Retighten loose connections and replace any damaged parts.

    Tyre condition
    • Check for pressure, puncture or cuts and irregular thread wear.


    Follow the Severe Maintenance Schedule if the customer's vehicle is driven MAINLY under one or more of the following conditions:
    • Driving less than 8 km (5 miles) per trip or, in freezing temperatures, driving less than 16 km (10 miles) per trip.
    • Driving in extremely hot [over 32 °C, (90 °F)] conditions.
    • Extensive idling or long periods of stop-and-go driving.
    • Trailer towing, driving with a car-top carrier, or driving in mountainous conditions.
    • Driving on muddy, dusty, or de-iced roads.
    NOTE: If the customer's vehicle is driven OCCASIONALLY under severe condition, you should follow the Normal Conditions Maintenance Schedule.