Maintenance Schedule for Severe Conditions - European Model

Stream 00-06 [RN1, RN3]

  1. Ichiban

    Service at the indicated distance or time whichever comes first.

    km x 1,000

    20

    40

    60

    80

    100

    120

    140

    160

    180

    200

    miles x 1,000

    12

    24

    36

    48

    60

    72

    84

    96

    108

    120

    months

    12

    24

    36

    48

    60

    72

    84

    96

    108

    120

    Replace engine oilD17A2 engine K20A1 engine

    Every 10,000 km (6,000 miles) or 6 months

    Replace engine oil filterD17A2 engine K20A1 engine











    Replace air cleaner element-Use normal schedule except in dusty conditions.

    D17A2 engine











    K20A1 engine






    Clean air cleaner element-Use normal schedule except in dusty conditions.

    K20A1 engine






    Inspect valve clearance D17A2 engine , K20A1 engine
    • Check the valve clearance.

    Every 40,000 km (24,000 miles)

    Replace fuel filterD17A2 engine K20A1 engine KE, KG models , Except KE, KG models


    Replace spark plugs D17A2 engine , K20A1 engine

    Every 40,000 km (24,000 miles)

    Replace timing belt, and inspect water pump and auto-tensioner
    • Remove timing belt
    • Check water pump for signs of seal leakage.
    D17A2 engine K20A1 engine

    ●* 1

    Inspect and adjust drive belts
    • Inspect and adjust alternator-A/C compressor belt for D17A2 engine , alternator belt for D17A2 engine Inspect and replace alternator-compressor belt for K20A1 engine
    • Check for cracks and damage.
    • Check deflection and tension.






    Inspect idle speedD17A2 engine K20A1 engine


    Replace engine coolantD17A2 engine K20A1 engine
    • Use Honda All Season Antifreeze/Coolant Type 2.

    200,000 km (120,000 miles) or 120 months, thereafter every 100,000 km (60,000 miles) or 60 months

    Replace manual transmission fluidD17A2 engine K20A1 engine
    • Use genuine Honda MTF (Manual Transmission Fluid).

    Every 60,000 km (36,000 miles) or 48 months

    Replace automatic transmission fluid4-speed Automatic Transmission 5-speed Automatic Transmission
    • Use genuine Honda AFT-Z1 (ATF).

    60,000 km (36,000 miles) or 48 months, thereafter every 40,000 km (24,000 miles) or 24 months

    Inspect front and rear brakes
    • Check the brake pad and disc thickness. Check for damage or cracks.
    • Check the wheel cylinder for leaks.
    • Check the brake linings for cracking, glazing, wear, or contamination.
    • Check the calipers for damage, leaks, and tightness.

    Every 10,000 km (6,000 miles) or 6 months

    Replace brake fluid
    • Use only DOT 3 or DOT 4 brake fluid. (We recommend genuine Honda Brake Fluid.)
    • Check that brake fluid level is between the upper and lower marks on the reservoir.

    Every 36 months

    Check parking brake adjustment
    • Check the parking brake operation.











    Replace air conditioning filter

    Every 30,000 km (18,000 miles) or 12 months

    Check light alignment
    • Check the position of the headlight.











    Test drive (noise, stability, dashboad operation)
    • Check for road stability, noise, vibrations and dashboard operation.











    Visually inspect the following items:
    • Check for correct installation and position, check for cracks, deterioration rust, and leaks.
    • Check tightness of screws, nuts, and joints. If necessary, retighten.

    Tie rod ends, steering gearbox, and boots
    • Check rack grease and steering linkage. Check the boot for damage and leaking grease.

    Every 10,000 km (6,000 miles) or 6 months

    Suspension components
    • Check the bolts for tightness
    • Check all dust cover for deterioration and damage

    Driveshaft boots
    • Check the boot and boot band for cracks
    • Check rack grease.

    Brake hoses and lines (including ABS)
    • Check the master cylinder, proportioning control valve and ABS modulator and leakage.











    All fluid levels and condition of fluid
    • Check levels and check for leaks. If necessary, add 4-speed automatic transmission fluid , 5-speed automatic transmission fluid , D17A2 engine coolant , K20A1 engine coolant , brake fluid , clutch fluid, windshield washer fluid, power steering fluid, and battery fluid.

    Exhaust system D17A2 engine K20A1 engine
    • Check the catalytic converter heat shieid, exhaust pipe and muffler for damage, leaks and tightness.

    Fuel line and connections D17A2 engine K20A1 engine
    • Check fuel lines for loose connections,cracks and deterioration. Retighten loose connections and replace any damaged parts.

    Tyre condition
    • Check for pressure, puncture or cuts and iregular thread wear.


    NOTE: If the customer's vehicle is driven OCCASIONALLY under severe condition, you should follow the Normal Condition Maintenance Schedule

    Follow the Severe Conditions Maintenance Schedule if the customer's vehicle is driven MAINLY under one or more of the following conditions:
    • Driving less than 8 km (5 miles) per trip or, in freezing temperatures, driving less than 16 km (10 miles) per trip.
    • Driving in extremely hot over 35°C (95°F) conditions.
    • Extensive idling of long periods of stop-and-go-driving.
    • Trailer towing, driving with a car-top carrier, or driving in mountainous conditions.
    • Driving on muddy, dusty, or de-iced roads.

    *1: Following for timing belt replace intervals under special conditions.
    • The timing belt should normally be replaced at the intervals shown in the Normal Conditions Maintenance Schedule .
    • Replace at 80,000 km (48,000 miles) or 60 months if the vehicle is regulary driven in one or more of these conditions.
      -
      In very high temperatures (over 43°C (110°F))
      -
      In very low temperatures (under −29°C (−20°F))