Replacing number plate bulbs

Accord 03-08 [CL9, CM2] (K24A3)

  1. K24 CL9 GUY
    Difficulty Level:
     
    Basic
    I thought I would share this very simple task with you as it appears some are not aware of how easy it is and literally takes 2 minutes.

    Only tool required is a trim removal tool and have your replacement bulb to hand.
    DSC_0070.JPG
    Carefully prey along the cover using the trim tool until the four clips pop out so completely free.
    DSC_0071.JPG
    You don't need to completely remove it as can pull it down enough to get the bulbs out.
    DSC_0072.JPG
    DSC_0073.JPG
    To remove the clear plastic cover you just squeeze the grey tabs on each side and will be able to pull it off.
    DSC_0074.JPG
    You can now replace the bulb.
    DSC_0075.JPG
    Turn your lights on so can make sure is working before close it back up.
    DSC_0076.JPG
    DSC_0077.JPG
    You can now put it all away - easy peasy :Smile:
    DSC_0078.JPG
    DSC_0079.JPG
    DSC_0080.JPG
    Take note of the location of the clips as will help you to take off.
    DSC_0081.JPG
    DSC_0082.JPG
    DSC_0083.JPG
    DSC_0084.JPG
    Love the look of the LEDs.