Engine & Gearbox Accord 2ltr and 2.4ltr Driveshaft lengths

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by Mudgey, Tuesday 9th Apr, 2013.

  1. Mudgey Junior Member ☆ ☆ ☆ ☆ ☆

    Exeter
    6
    1
    Hi,

    I am putting a supercharged 2ltr K20a2 engine into my 5th Generation Prelude Type-S. We have the same car width and I assume track width also. I am hoping the 2ltr or 2.4ltr 6 speed Accord driveshafts will fit but I need an end to end measurement either full compressed or uncompressed. Does anybody happen to have this info or are able to get it? It would be much appreciated as off the shelf shafts are cheaper than custom made ones!

    Thanks for your time.
    Adam
     
  2. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,593
    4
    Hi Adam, welcome to the forum.

    How about a trade... we get the drive shaft info for you if you do a full detailed thread on your project ? :Smile:
     
    Loading...
    K24 CL9 GUY and Ichiban like this.
  3. Ichiban Founder Staff Team

    England CJ Leeds
    30,133
    6,388
    516
    Mee too in the game if you meet us half way...
     
    Loading...
  4. Mudgey Junior Member ☆ ☆ ☆ ☆ ☆

    Exeter
    6
    1
    Deal!

    This is a very condensed build diary:

    Prelude1_zps296d82d3.

    CTRScrapped16012013_zps29a166ab.

    EngineIntakeSide28102012-1_zps8656b8c0.

    PreludeEngineBay3_zpsea74a0a0.

    PreludeEngine_zpsffbbc551.

    ChainCoverEngineMount_zps1f4985cf.

    CCEM2_zps6ed0c266.

    49Supercharger04022013_zps4eec3a64.

    50ChargerInstallation04022013_zpsce896d3d.

    53EngineClearance04022013_zpsacb068fe.

    photo1_zpsfa1d248e.


    photo22_zpsce6f3877.

    DoubleDinGaugeCloseUp_zps6b5999fb.

    DoubleDinGaugeBack_zpseef4f844. b


    Its a little bit further ahead but I should hopefully be able to start it soon.
     

    Attached Files:

    Ichiban likes this.
  5. Ichiban Founder Staff Team

    England CJ Leeds
    30,133
    6,388
    516
  6. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,593
    4
    Top stuff !! Looking good, seems well planned, nothing rushed.

    How much time have you spent on this project so far ?
     
    Loading...
  7. Mudgey Junior Member ☆ ☆ ☆ ☆ ☆

    Exeter
    6
    1
    Its taken a good 4 months or so now, but thats with working on it at weekends or here n there, I just can't wait to get it running now as its been so long!

    Has anybody have the odd driveshaft hanging around to measure from? I am in need of my last part, the drive shafts!! :Smile:
     
  8. Ichiban Founder Staff Team

    England CJ Leeds
    30,133
    6,388
    516
    Hi Adam,

    I hope this helps bud even with taking the hubs and spines you can get a custom lengths one made if the length is a tad small.

    AOCUK Driveshafts CL9.

    Part nunmber 44305-SEA-N00

    Description DRIVESHAFT ASSY Right Origin JAPAN
    Retail price with VAT 442.99 GBP

    Height (mm) 140
    width (mm) 125
    Length (mm) 635
    Volume (m³) 0,0111125
    Net weight (kg) 4.590

    Part number 44306-SEA-N50

    Description DRIVESHAFT ASSY Left. Origin JAPAN
    Retail price with VAT 442,99 GBP

    Height (mm) 140
    Width (mm) 125
    Length (mm) 635
    Volume (m³) 0,0111125
    Net weight (kg) 4.500

    Part number 44500-SDA-A00
    Description SHAFT ASSY,HALF Origin JAPAN


    Retail price with VAT 310,43 GBP
     
    Loading...
  9. Ichiban Founder Staff Team

    England CJ Leeds
    30,133
    6,388
    516
    You can play around with half shaft placement thou

    Part number 44500-SDA-A00
    Description SHAFT ASSY,HALF Origin JAPAN


    Retail price with VAT 310,43 GBP



    Height (mm) 150
    Net weight (kg) 3,435
    Width (mm) 150
    Length (mm) 493
    Volume (m³) 0,0110925
     
    Loading...
  10. Mudgey Junior Member ☆ ☆ ☆ ☆ ☆

    Exeter
    6
    1
    Thanks, are these the same for both the 2.0 and the 2.4ltr? Do you also know if the measurements are end to end?
     
  11. Ichiban Founder Staff Team

    England CJ Leeds
    30,133
    6,388
    516
    Oh the above are for the 2.4 CL9 the measurements are from the diff side to the wheel hub centre for the left one and to the half shaft for the right you can calculate the rest for the right .

    I will get the 2.0 measurements for you.
     
    Loading...
  12. Ichiban Founder Staff Team

    England CJ Leeds
    30,133
    6,388
    516
    For the 2.0 the height length and width are the same but the total weight is higher.

    Left weighs 8 Kgs
    Rights weighs 7.5 Kgs