Aftermarket Kit Aftermarket red "H" Emblem on front and rear?

Discussion in '8th Generation (2008-2015) [Acura TSX]' started by royalblue, Wednesday 22nd Jan, 2014.

  1. royalblue Club Member ★ ☆ ☆ ☆ ☆

    Anyone tried this?

    It would definitely enhance the front grille...maybe even the rear tailgate/boot. (on the Tourer, the this rear emblem is bigger than the current chrome "H")

    Especially if the emblem is well-made.

    RED?H?LOGO EMBLEM BADGE ACCORD CM2 Civic FA1 FD1 | eBay

    modi_cacpb-honda-1113_02. modi_cacpb-honda-1113_03.

    landed is gonna be £72 including tax! Gulp.
     
    Loading...
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,376
    516
    Aftermarket red "H" Emblem on front and rear?

    The Civic Type-R EP3 badges will fit no problem on the 7th Generation I have tried it and it looks cool. You can pick them up at discounted rates from HH if you wanted or your local dealer and it the real thing :Smile:
     
    Loading...
  3. royalblue Club Member ★ ☆ ☆ ☆ ☆

    Thanks CJ!

    But okay to assume that 7th Generation and 8th Generation is exactly the same fitting?

    Will get one as I think that would 'out factory the Honda factory'!

    Will post pics....
     
    Loading...
  4. DeviateDefiant Co-Founder Staff Team

    United Kingdom Leo Northants
    9,206
    2,976
    3
    I believe the 8th Generation is slightly bigger. I know for the CU2 8th-Gens these two have been used in the past for the front and rear:

    aR7lGNl.

    75700-SNW-003 (£58.54)
    35114-SNW-J01 (£18.07)

    Those are list prices, so Holdcroft Honda would be a bit cheaper with our club discount and free next day delivery.
     
    Loading...
    John Dickson likes this.
  5. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,376
    516
    EP3 facelift one is the same as the above bud..
     
    Loading...
  6. DeviateDefiant Co-Founder Staff Team

    United Kingdom Leo Northants
    9,206
    2,976
    3
    Perfect then, I didn't cross check it.
     
    Loading...
  7. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,376
    516
    yes for the front they are the same on the 7th and the 8th Generation.. I have just added the EP3 facelift ones as I didnt make it clear the fit perfectly. The pre facelift EP3 ones are slightly smaller (Front one).

    7th Generation tourer rear has no legs or holes in the rear its just a stick on.
     
    Loading...
  8. royalblue Club Member ★ ☆ ☆ ☆ ☆

    Hi Guys,

    Basically,


    • Front emblem is about 4.8" x 4" or (123mm x 102mm)
    • Rear emblem is about 3.6" x 3" or (92mm x 75mm)

    Is fine right?

    Reason why I ask is because my car is in the garage so I can't check!

     
    Loading...