Tyres & Wheels Alloy Wheel Lug bolts

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by JamesS, Sunday 21st Dec, 2014.

  1. JamesS Senior Member ★ ★ ☆ ☆ ☆

    James Leeds
    191
    75
    anyone got a preferred wheel nut manufacturer? I had a bad experience with D1 Spec nuts, they split and cracked!

    But need some for my CL9 now, anyone got any suggestions?
     
    Loading...
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,376
    516
    Stock wheel bolts don't do that, get then anodised and they will look the part and won't fail. Stock personally is better than aftermarket... sometimes.
     
    Loading...
  3. JamesS Senior Member ★ ★ ☆ ☆ ☆

    James Leeds
    191
    75
    True, I think I going to stick to some steel ones this time, but my stock ones are miss-matched. Not sure what the previous owner was doing. So will see what I can find, must be some nice quality ones somewhere!
     
    Loading...
  4. toyracer69 Junior Member ★ ☆ ☆ ☆ ☆

    London
    82
    31
    I use open ended Motegi wheel nuts on my ATR. Have been for years. The only concern is you have to be a little careful with the tool take you use to put them on and off with. :Wink:
     
    Loading...
    JamesS likes this.
  5. JamesS Senior Member ★ ★ ☆ ☆ ☆

    James Leeds
    191
    75
    Loading...