General ATR Swaybar/ Anti roll bar on the CG9

Discussion in '6th Generation (1997-2002)' started by Fiskekutteren, Monday 15th Feb, 2016.

  1. Fiskekutteren Club Member ★ ☆ ☆ ☆ ☆

    Denmark Roskilde
    91
    78
    1
    Greetings.

    Do the Swaybar's from the Honda Accord Type-R fit, the "standard" 99 Accord CG9?

    Thank you :Smile:
     
    Loading...
  2. exec Premium Member Club Supporter

    United Kingdom London
    2,860
    1,490
    I believe so, although not 100% sure, the ATR ARBs are thicker.
     
    Loading...
    Fiskekutteren likes this.
  3. Fiskekutteren Club Member ★ ☆ ☆ ☆ ☆

    Denmark Roskilde
    91
    78
    1
    I only want them because they are thicker than the ones, who are on the car :Smile:
     
    Loading...
  4. Fiskekutteren Club Member ★ ☆ ☆ ☆ ☆

    Denmark Roskilde
    91
    78
    1
    After a bit of research and measuring my own car. I have found out that the rear ARB is the same thickness on both the ATR and the CG9. :Smile:

    So it is only the front, which should be thicker. I have measured mine and it says 25 mm.
     
    Loading...
    exec likes this.
  5. exec Premium Member Club Supporter

    United Kingdom London
    2,860
    1,490
    Interesting find there, I guess since the ATR has LSD it doesn't really need thicker ARBs at the back to reduce understeer, whereas our cars we would want thicker rear ARBs.
     
    Loading...
    Fiskekutteren likes this.