Engine & Gearbox denso 192400-1002

Discussion in '6th Generation (1997-2002)' started by Christyn Lingham, Tuesday 17th Sep, 2013.

  1. hi all newbie to the forum here I've an oxygen sensor issue i.e its not working the one on the manifold i took out the denso 192400-1002 one that was in it to see the part number to get another but im failing miserably to find one can anyone help ? the cars a s reg 2.0 ex model
     
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,177
    6,407
    516
    Hi Mate could you take a image of this so we can see what it is? Thanks
     
    Loading...
    Christyn Lingham likes this.
  3. its the lambder sensor mate attached to the exhaust manifold not the cat side
     
  4. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,595
    4
    Does it look like this :-


    DATA_34%5C501852.


    Or does it have any soldered joints, which would suggest its been previous swapped out with a generic one.

    Honda part number should be 36532 PAA G01
     
    Loading...
  5. hi again its got the grey plastic connecter one end and screws in the other side to the exhaust
     
  6. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,595
    4
    Search for the Honda part number on ebay
     
    Loading...
  7. that part number shows results for 2.3l engines so unless they use the same part im no better off i herd that the engine i have won't work with just any part it has to be the correct one?
     
  8. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,595
    4
    CJ can you verify the part number 36532 PAA G01 ?


     
    Loading...