Body, Paint & Styling Door mirror

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by akingsley, Tuesday 20th Nov, 2012.

  1. akingsley Junior Member ☆ ☆ ☆ ☆ ☆

    Hi
    Is it possible to replace the black plastic trim surrounding the door mirror? Someone has obviously whacked my mirror in a car park and broken the trim, which is quite badly cracked with a bit of a hole. Luckily the mirror itself, the housing and the indicator repeater are fine, but it doesn't look very nice. I had thought of filling it with black silicon sealer, but that could be messy and it might end up looking worse.
    Ta
    Andrew Kingsley
     
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,101
    6,367
    516
    Hey Andrew ,

    Its achievable as the part with the black trim can be removed and replaced, however you cannot get that as a new part but you can easily salvage that part from a donor mirror.

    Front door mirror 7th gen AOCUK.JPG
     
    Loading...
  3. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,591
    4
    I would be cheaper and easier just to replace the whole mirror assembly with a second hand one, should only cost around £40.
     
    Loading...
  4. Ichiban Founder Staff Team

    England CJ Leeds
    30,101
    6,367
    516
    yup if you find the same colour.
     
    Loading...
  5. Ichiban Founder Staff Team

    England CJ Leeds
    30,101
    6,367
    516
    Andrew any update on this ?
     
    Loading...