General Dow Corning Molykote G-Rapid Plus Solid Lubricant Paste - 400 ml Spray

Discussion in 'General Discussion' started by Bones126, Monday 1st Jun, 2015.

  1. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Morning

    Can anyone advise where I can buy a can of "Dow Corning Molykote G-Rapid Plus Solid Lubricant Paste - 400 ml Spray" from please?

    Cheers
    Dave
     
    Loading...
  2. Busa1340r Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Yate
    79
    57
    Loading...
    Bones126 likes this.
  3. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Loading...
  4. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,377
    516
    This is the stuff for noisy CMC and other applications.
     
    Loading...
    Nighthawk likes this.
  5. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Hi @Ichiban , yes for the noisy clutch which seems to be getting a bit grabby too.
     
    Loading...
  6. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    Loading...
  7. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Blimey, £20 delivery from the link Busa has put on which makes it almost £40 a can :shock:
     
    Loading...
  8. Busa1340r Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Yate
    79
    57
    Didn't get as far as postage costs...soz:Wassat:
     
    Loading...
    Bones126 likes this.
  9. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,377
    516
    Call HH they stock it mate and free delivery too.

    I would use M77 personally but that also will do the job don't use that on your sliders thou. just pads and pad retainers.
     
    Loading...
    Bones126 likes this.
  10. AccordCU2 Expert Advisor ★ ★ ★ ★ ★


    Thanks for the answer.
    I'll get some M77 for sliders from local dealer then.
     
    Loading...
  11. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,377
    516
    M77 is again for the pads and retainers you want to use premium silicone grease for the sliders like

    Bosch Superfit or Threebond

    thr_tbetb900002.

    T0100.
     
    Loading...
    SpeedyGee and AccordCU2 like this.
  12. Busa1340r Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Yate
    79
    57
    Just looked at Data Sheet....classed as Hazardous 2.1 / UN1950 ADR so can't be sent in standard post. £20 still seems pricey though don't it?
     
    Loading...
    Bones126 likes this.
  13. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    Thanks for the tip,ordered now for the weekend so i can get on with it.
     
    Loading...
    Ichiban likes this.
  14. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    No worries @Busa1340r , at least you managed to find a supplier which is more than I achieved :-/

    Thanks @Ichiban , will give them a call later.

    Although I suspect my problem is leading to a worn thrust bearing :-(
     
    Loading...
  15. Nighthawk Guest

    United Kingdom Richard Milton Keynes
    5,369
    3,141
    14
    @Bones126 - that molycote stuff is great, worked on my Accords CMC for a while, made it butter smooth, but eventually I had to replace the CMC on it anyway.
     
    Loading...
    Bones126 likes this.
  16. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Loading...
    Ichiban and Nighthawk like this.
  17. kes Club Member ★ ☆ ☆ ☆ ☆

    I have just ordered some of this too. I spoke to Holdcroft Honda who say they order it in from Peugeot, I contacted my local Peugeot dealer and they have ordered it in for me. Wasn't cheap though about £20, will update the thread with a part number when it arrives.
     
    Loading...
  18. kes Club Member ★ ☆ ☆ ☆ ☆

    Th grease is labelled Peugeot and Citreon so maybe can get it from both?
    Part number 9732 05
     
    Loading...
    Ichiban likes this.