Aftermarket Kit DVD headrest

Discussion in '3rd Generation (2006-2012)' started by Steve8274, Monday 28th Dec, 2015.

  1. Steve8274 Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Steve Wigan
    67
    12
    Loading...
  2. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,591
    4
    @Allwoods Audio may be able to advise here but I would think you need to undo the seat cover from the bottom of the seat to get your hand up to pull the wires through.
     
    Loading...
  3. Wizard Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Andy Surrey
    95
    30
    I fitted a set of headrest dvd screens to my car for demonstration purposes (removed later as I stopped stocking them).

    Seat backs come away easily as they are held on with clips. They are a brittle though and break easily. I would suggest buying some in advance.

    With seat backs off it is very easy to run the cables down to the seat base.
     
    Loading...
    Steve8274 likes this.
  4. Steve8274 Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Steve Wigan
    67
    12
    Thanks. How did the backs come off? Simply pull away? Is there a correct procedure? Can you remember what the clips look like?
     
    Loading...
  5. Wizard Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Andy Surrey
    95
    30
    Pop out the centre of the arm rest, undo the nut, remove armrest.

    Then pull seat back off from the bottom. I then think you pull it downwards.
     
    Loading...