Suspension, Steering and Brakes EK3 bushes needed

Discussion in '6th Generation (1996-2000)' started by nick-b, Saturday 7th Feb, 2015.

  1. nick-b Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom Nick oxford
    59
    47
    anyone know where i can get a set of front lower suspension bushes?? they are the ones that the lower wish bone bolt through?

    I only fitted the poly bushes a year ago and they have rusted onto the bolt already? Pain in the arse as I can't start the new engine until i have the driveshafts in?
     
    Loading...
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,118
    6,375
    516
    Nick is your a VTI? if not what spec mate.

    This is off a VTI tell me the part item numbers I will dig out the part numbers and prices and HH may get them at our discounted prices :Smile:

    EK3.PNG


    item 2 :- 51306-SR3-N01 BUSH, STABILIZER HOLDER
    item 4 :- 51312-SD4-020 RUBBER, STABILIZER END
    item 10 :- 51398-SR3-000 WASHER B, FR. RADIUS ARM (14MM)
    item 11 :- 51399-SR3-010 WASHER A, FR. RADIUS ARM (18MM)
    item 12:- 51810-SH3-004 BUSH, SHOCK ABSORBER FORK (YAMASHITA)
     
    Loading...
  3. TZR Junior Member ☆ ☆ ☆ ☆ ☆

    United Kingdom TysonZ London
    6
    5
    Hardrace bushes could be an option?
     
  4. DeviateDefiant Co-Founder Staff Team

    United Kingdom Leo Northants
    9,206
    2,976
    3
    The VTi/SiR are EK4, the EK3 is a D15Z4. The lower bushes are the same on all EKs but the ARB D-Bushes are different on the EK9s.

    Energy Suspension are the most popular polyurethane choice, and perhaps the polybushes you now have which are seized :Laughing: That's normally down to not being greased properly when they're installed. Honda Genuine stock is very low for EK bushes (some are out completely) but definitely the best choice overall IMO.
     
    Loading...