Bulletins & Advisories Engine Hesitation

Discussion in '4th Generation (2013-2017)' started by Service News, Saturday 9th Mar, 2013.

  1. Service News Staff Managed Dealer Information

    UK
    202
    33
    Honda TSB SN-03-003-00dated 06-03-13 affecting CR-V I-DTEC RE6 all 2013 model year production.

    The
    Symptoms
    During engine warm up, the CR-V owner may experience an occasional, momentary engine hesitation when applying light accelerator pedal pressure.

    The Cause
    The engine hesitation is caused by excessive exhaust gases (EGR) being allowed into the cylinders at a certain engine and ambient temperature combination, while the engine is warming up. The excessive exhaust gases have an adverse effect on combustion causing the hesitation.

    The Fix
    An ECM software update has been released to correct this issue. If any CR-V owner encounters this issue please book your car at the nearest Honda dealer for an update to ECM software using HDS Version: 3.007.011, January 2013 or later.

    The fix will take in excess of 20 minutes to apply.
     
  2. TheDarkKnight Expert Advisor ★ ★ ★ ★ ★

    2,688
    492
    Re: 4th Generation Engine Hesitation

    Just a bump for all 4th Generation CR-V owners in case they have not seen this :Thumbup:
     
    Loading...
  3. Ichiban Founder Staff Team

    England CJ Leeds
    30,120
    6,376
    516
    Re: 4th Generation Engine Hesitation

    Can file uploading firms offer this level of bespoke troubleshooting .. hell no they make you convinced this needs removing :Rolf:
     
    Loading...