Pre-Facelift Model Fitting Mugen Pedals

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by DeviateDefiant, Saturday 16th Mar, 2013.

  1. DeviateDefiant Co-Founder Staff Team

    United Kingdom Leo Northants
    9,206
    2,977
    3
    I decided to invest in some nice Mugen pedals to replace my wearing OEM plastic ones.

    I've seen threads on the 8th Generation having pre-drilled holes, but that's not the case with the 7th right?

    Can anyone offer advice on what tools am I going to need to fit them. I don't currently own a rivet gun.
     
    Loading...
  2. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    7th Generation does not have pre drilled pedals so you will have to drill them.
    You only need Drill, drill bits (3.5 mm if i remember correctly) and rivet gun really.
    sports pedals.
     
    Loading...
    DeviateDefiant likes this.
  3. DeviateDefiant Co-Founder Staff Team

    United Kingdom Leo Northants
    9,206
    2,977
    3
    Drill/bits I have, and seems a cheap rivet gun is under a tenner on Amazon so I'll get that ordered.

    Would I be right in saying go through with a smaller drill piece first then through again with the 3.5mm like working on walls? No experience drilling metal whatsoever.
     
    Loading...
  4. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    No need,just get a correct size drill bits for rivets you will be using.
     
    Loading...
  5. DeviateDefiant Co-Founder Staff Team

    United Kingdom Leo Northants
    9,206
    2,977
    3
    Will do, thanks for the help.
     
    Loading...