Guides FR-V 2.2 i-CTDi Diesel Service

2.2 i-CTDi engines

  1. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Bones126 submitted a new guide:

    FR-V 2.2 i-CTDi Diesel Service - 2.2 I-CTDI engines

    Check the full guide here.
     
    Loading...
    Ichiban likes this.
  2. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Thanks for your help moving this guys, much appreciated. I hope it helps others when it comes to servicing their FR-V's
     
    Loading...
    SpeedyGee likes this.
  3. stu(pid) Junior Member ☆ ☆ ☆ ☆ ☆

    UK
    16
    5
    Great write up! Couple of questions. Does the silver filter unit simply sit in the black holder? Any idea how much brake fluid you used to flush the system?
    Thanks.
     
    Bones126 likes this.
  4. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    Hi @stu(pid) The silver part is bolted into the black holder. If you look at the third picture, the one of the empty holder, at the top you can see 4 bolt holes. There are 2 to hold the cover you can see in the picture first pictures which sits over the filter and the other 2 are for the bolts that hold it in place to the holder, if I remember correctly they are 12mm bolts where the cover bolts are 10mm.

    I used easy 1.5 ltr of brake fluid, this was bleeding the brakes until i saw fresh, clean fluid coming out of the callipers.

    Hope that helps, happy to help with anything else I can.
     
    Loading...
    SpeedyGee likes this.
  5. stu(pid) Junior Member ☆ ☆ ☆ ☆ ☆

    UK
    16
    5
    Perfect - much appreciated!!
     
    Bones126 likes this.
  6. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    My pleasure, any other questions just ask :Smile:
     
    Loading...
    Nels and SpeedyGee like this.
  7. kes Club Member ★ ☆ ☆ ☆ ☆

    Well done for taking the time to do this. Will help me and many others out.
     
    Loading...
    Bones126 likes this.
  8. tucker Junior Member ☆ ☆ ☆ ☆ ☆

    United Kingdom tucker Ramsbottom
    16
    7
    Hi, what do I need to remove the oil filter housing?
    In my old car it has a standard 27mm socket on the top of the plastic housing, but the Honda is different.
     
    Loading...
  9. Ichiban Founder Staff Team

    England CJ Leeds
    30,130
    6,383
    516
  10. tucker Junior Member ☆ ☆ ☆ ☆ ☆

    United Kingdom tucker Ramsbottom
    16
    7
    A few of those links don't seem to now work. I have a chain type remover one and one that is like a strap grip. Will these do the job?
     
    Loading...
  11. Ichiban Founder Staff Team

    England CJ Leeds
    30,130
    6,383
    516
    Both links work here bud, a chain type will damage the plastic casing the more you use it. You need a flute type cup filter ideally.
     
    Loading...
  12. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    image. Hi , it's a cap type 76mm and 14 flute
     
    Loading...
    Ichiban likes this.
  13. Nels Moderator Staff Team

    @tucker the filter casing on the I-CTDI is a plastic/composite material. Unless you are very careful, the chain type removers may damage or crack it. A strap type may also damage it. You are much better off with a fluted cup type. Additionally, you car torque it back on to the correct amount.
     
    Loading...
    Bones126 and Ichiban like this.
  14. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,593
    4
    @tucker add your FR-V to the Club Garage sir. It will help others to help you as they will see what car and engine you have just by looking at your signature :Smile:
     
    Loading...
  15. kes Club Member ★ ☆ ☆ ☆ ☆

    worth buying as will make the job much easier and you can use a torque wrench with it too. Not had to do a service on mine yet but have one already, used on many German cars in the past.
     
    Loading...
  16. tucker Junior Member ☆ ☆ ☆ ☆ ☆

    United Kingdom tucker Ramsbottom
    16
    7
    Thanks. I will have a look for one.
    I wasn't referring to your links in the post Ichiban, but some of the links within the other thread on where to buy the cup type tool.
     
    Loading...
  17. Bones126 Top Contributor ★ ★ ★ ★ ☆

    England Dave Birmingham
    925
    447
    2
    I got mine off ebay, plenty to choose from on there.
     
    Loading...
  18. Nighthawk Guest

    United Kingdom Richard Milton Keynes
    5,369
    3,143
    14
    Loading...
    SpeedyGee and Bones126 like this.
  19. tucker Junior Member ☆ ☆ ☆ ☆ ☆

    United Kingdom tucker Ramsbottom
    16
    7
    Going to change the oil and filter this weekend. Just had a quick look underneath but it's quite low to see without getting it on ramps.

    Am I right in thinking there is access to the drain plug through the sump tray, without the need to remove the tray?
     
    Loading...
  20. Ichiban Founder Staff Team

    England CJ Leeds
    30,130
    6,383
    516