Accord/8th Gen GT Badge added & Lamin-X film applied to fog lights

Discussion in 'Project & Modification Logs' started by Nick Allen, Saturday 20th Oct, 2012.

  1. Nick Allen Club Member ★ ☆ ☆ ☆ ☆

    P1010877. P1010878.

    I like the Lamin-X film cut a template on card first and trimmed to the size I needed, then cut the film to the template, peeled a little of backing back and rubbed into place with paper towel, gradually peeling the rest of the backing backing and rubbing with paper towel to remove air bubbles.

    As for the Alfa GT badge, not convinced yet with its position or style..
     
    Loading...
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,101
    6,367
    516
    re: GT Badge added & Lamin-X film applied to fog lights

    I like it mate..
     
    Loading...
  3. Adamk Club Member ★ ☆ ☆ ☆ ☆

    Derby
    145
    14
    re: GT Badge added & Lamin-X film applied to fog lights

    im like the fogs i did mine about 2 days after havin car did you take your bumper of to do them
     
  4. Nick Allen Club Member ★ ☆ ☆ ☆ ☆

    re: GT Badge added & Lamin-X film applied to fog lights

    I didnt need to, there is plastic fascia which I was able to pull the top most corner out, which allowed me to reach all of the lens.. it just slides and pushes back in. (I could see that the bottom corner of the fascia is attached from the other side of the bumper so don't try to pull it all off)
     
    Loading...
  5. Nick Allen Club Member ★ ☆ ☆ ☆ ☆

    re: GT Badge added & Lamin-X film applied to fog lights

    just done a bit mspaint copy and pasting and moved the badge, what do folks think of the new position

    P1010878GTbadge.
     
    Loading...
  6. TheDarkKnight Expert Advisor ★ ★ ★ ★ ★

    2,688
    492
    re: GT Badge added & Lamin-X film applied to fog lights

    Hm, I dunno about that GT badge buddy...

    The font of that is all wrong and doesnt suit it.

    I prefer "less is more" to be honest. But if you're happy....thats the main thing :Thumbup:
     
    Loading...
  7. richsprint Account Closed. ★ ★ ★ ★ ☆

    re: GT Badge added & Lamin-X film applied to fog lights

    GT badge looks good, possibly needs to be further to the right, kind of above the same place on the right rear light where the Accord badge sits on the left light.
     
  8. narcosis Senior Member ★ ★ ☆ ☆ ☆

    re: GT Badge added & Lamin-X film applied to fog lights

    I have to be honest and think both do not suit the car but then this is subject to personal opinion :Smile: I like the idea of the film on the fogs but would prefer it to be clear.

    Neil
     
    Loading...
  9. rhinogolf Valued Contributor ★ ★ ★ ☆ ☆

    york
    330
    13
    re: GT Badge added & Lamin-X film applied to fog lights

    preferred badge on 1st photo were do you get the film from for the fogs and what is prober name
     
  10. Nick Allen Club Member ★ ☆ ☆ ☆ ☆

    Loading...
  11. rhinogolf Valued Contributor ★ ★ ★ ☆ ☆

    york
    330
    13
  12. Ichiban Founder Staff Team

    England CJ Leeds
    30,101
    6,367
    516
    re: GT Badge added & Lamin-X film applied to fog lights

    Pardon :Unknown: what this Dave ?
     
    Loading...