General Ignition module

Discussion in '5th Generation (1994-1997) [Rover 600, Isuzu Aska]' started by Accord 1994, Friday 27th Mar, 2015.

  1. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Hi all, need to fit a new ignition modgul on my 94 Honda accord aerodeck, not done one before any helpful tips gratefully received, thanks for your time, appreciated!!!
     
  2. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,591
    4
    Loading...
  3. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Yes sorry, I misspelt it.
     
  4. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,591
    4
    @Chunkylover53 or anyone else able to offer any advice on this, I'm a little rusty on my older systems.
     
    Loading...
  5. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Hi all, a follow on from this it was not the module, distributer checks out which includes the module and coil but still no spark, leads and plugs ok, any suggestions please would be gratefully received, thank you for your time!!
     
  6. Nels Moderator Staff Team

    Anyone able to help Bruce on this? :SOS:
     
    Loading...
  7. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,591
    4
    Can you confirm there is ignition positive at the distributor.
     
    Loading...
  8. Ichiban Founder Staff Team

    England CJ Leeds
    30,101
    6,367
    516
    Have you check the dizzy rotor for wear on the central carbon bush as well as the rotor pick up. These are known to wear out.
     
    Loading...