Engine & Gearbox MTF Change

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by sawf1, Monday 23rd May, 2016.

  1. sawf1 Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom James Poole
    44
    21
    Hey guys,
    Just in the middle of changing my transmission fluid and am having a bit of trouble. I've emptied the old fluid out and with the car up on a jack stand on the passenger side filled it with 1.8 litres approx of new fluid before fluid started coming back out. Problem is I know the car takes 1.9 litres for a change and I can't get to the fill plug to undo it whilst the car is on the ground. Am I being thick (always quite possible) or have I missed a trick to get that last bit of fluid in there?
     
    Loading...
  2. Nels Moderator Staff Team

    Loading...
  3. sawf1 Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom James Poole
    44
    21
    I saw the first one but not the second. Shortly after posting I realised that I could just jack up the back end until it was even with the front, so job done thanks.
     
    Loading...
    Nels likes this.
  4. Nels Moderator Staff Team

    Glad to read you've done it. :GoodJob:
     
    Loading...