Detailing Paint correction

Discussion in 'Detailing & Cleaning' started by AccordCU2, Sunday 31st Mar, 2013.

  1. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    On Friday had a busy day(i didnt do anything,lazy so and so) with very nice chap called Wayne who detailed my car.Must say i am very impressed with finished results and his dedication and eye for detail.
    Arrived very early and he started straight away to work on the car.
    Car was stripped of any old wax and then deter and deiron was done.After that claying took place.
    Then Wayne proceeded with machine polishing which takes long time.
    Machine polished and glazed done car was snow foamed and sealed using this new product CarPro Hydr02 Touchless Sealant - Spray & Rinse.

    Here is couple 50/50 shots,you can see how bad swirls were but all gone now.
    20130329_091927. 20130329_102333.

    And some of finished product

    20130329_160606. 20130329_160511. 20130329_160347. 20130329_160245. 20130329_160232.
    20130329_160518. 20130329_160716. 20130329_160617. 20130329_151342.

    Big thanks goes to Wayne and his brilliant work and patience to show and explain step by step to me.
    Just hope i can do him justice and keep car this way from now on.

    Copied some more pictures
    swirl 4. Swirl. swirl 1. swirl6. swirl 3. swirl 5.
     
    Last edited: Sunday 31st Mar, 2013
    Loading...
  2. vygec Club Member ★ ☆ ☆ ☆ ☆

    stunning!

    If i weren't so busy today, i would definitely have given the car a wash today
     
    Loading...
    AccordCU2 likes this.
  3. richsprint Account Closed. ★ ★ ★ ★ ☆

    Hi Zoran

    Is that Wayne who works with Daz at Detail my Ride?

    Looks great, how much does he charge?

    Rich
     
    AccordCU2 likes this.
  4. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    Hi Rich
    Not from detail my ride.
    This chap Wayne I met through Civinfo forum.
     
    Loading...
  5. stueymalton Club Member ★ ☆ ☆ ☆ ☆

    Zoran she looks awesome !!
    +1 on the cost.

    Also what processes will you be doing to maintain this finish ?
     
    AccordCU2 likes this.
  6. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    Thanks for the comments lads.
    Wayne talked me through safe method to prevent swirls and scratches as much as possible.
    1 Snow foam and leave it to dwell for 10-15 minutes and rinse it.
    2 Two bucket method wash with Lambswool mitt(in straight lines)
    3 Dry it with microfibre towels(straight lines again)
    4 Sealant or wax to finish

    Regarding the cost i will speak to Wayne to discuss that one with you all.
     
    Last edited: Sunday 31st Mar, 2013
    Loading...
    stueymalton likes this.
  7. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
    Hi Zoran, thanks for the comments, it was a pleasure working on a lovely motor albeit a hard day but worth it when it was finished, thanks Wayne
     
    AccordCU2 likes this.
  8. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    Absolutely,it look stunning now.
    don't want to drive it now so it stays this way.
    Thanks again for your brilliant work.
     
    Loading...
  9. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
    Your welcome, you can add a layer of your collinite 915 in a couple of months for more protection, applying thinly as you know
     
  10. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,595
    4
    Superb job ! Looking awesome mate !
     
    Loading...
  11. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
    Thanks for the comments guys
     
  12. FirstHonda Premium Member Club Supporter

    Amazing, just amazing. :GoodJob:
     
    Loading...
  13. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
  14. Ichiban Founder Staff Team

    England CJ Leeds
    30,182
    6,412
    516
    Wayne have you considered doing a open day how to detail your Honda's the correct way ?

    I am sure there will be loads of members up for it ..
     
    Loading...
  15. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
    Hi, to be honest i'm just an enthusiast thats been into detailing/machining for a few years now, i'm 44 lol. I've done a fair few cars over the years and do a few cars now and then on my days off from working shifts. I get 6 days off in every 10 so plenty of time for me to fill. I can certainly help you guys out on here as i have done on civinfo where i am an active member although i don't own a Honda anymore but feel free to ask away etc and i'll help where i can. Thanks wayne
     
  16. Ichiban Founder Staff Team

    England CJ Leeds
    30,182
    6,412
    516
    I am sure people will coming flocking to you !
     
    Loading...
  17. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
    Lol not upto now, pretty quiet in this section :Frown:
     
    Ichiban likes this.
  18. Nottstourer Junior Member ☆ ☆ ☆ ☆ ☆

    Where are you based Wayne?
     
  19. wanner69 Detailing & Styling Trader

    Wirral
    375
    216
    Bebington, Wirral buddy
     
  20. AccordCU2 Expert Advisor ★ ★ ★ ★ ★

    Wayne in need of your expertise sooner then expected because of some peep peep.
    Someone ruined your master work in supermarket car park despite me parking as far as possible from other cars.What is the best way to remove this?
    IMAG0649.
    Thanks
     
    Loading...