Suspension, Steering and Brakes Rear camber adjustment arms

Discussion in '7th Generation (2003-2008) [Acura TSX]' started by JamesS, Monday 13th Apr, 2015.

  1. JamesS Senior Member ★ ★ ☆ ☆ ☆

    James Leeds
    191
    75
    Hi all,

    Could someone please help. I am trying to find out the best way to get these bolts off. Its the one that hold the upper rear arm onto the sub frame. It looks un-accessible at best! Also been told that there is a chance the bolt is seized in. Anyone else done this job themselves or is time to book it into a garage? Attach a pic @SpeedyGee found showing the bolt in question.

    76927_RearControlArm.
     
    Last edited by a moderator: Monday 13th Apr, 2015
    Loading...
  2. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,593
    4
    That bolt shouldn't be that hard to get off at all.

    Are you sure you attacking the correct side of it ?

    One side has a nut welded on to the supporting bracket. You can only undo the bolt from the other side.
     
    Loading...
  3. JamesS Senior Member ★ ★ ☆ ☆ ☆

    James Leeds
    191
    75
    Yeah, I can see the welded nut, but can't get anything into the gap to get the bolt undone. Do I need to go at it from the other side?
     
    Loading...
  4. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    14,999
    5,593
    4
    I didn't have any problem when I did mine. There should be plenty of space for a spanner at least.
     
    Loading...
  5. JamesS Senior Member ★ ★ ☆ ☆ ☆

    James Leeds
    191
    75
    Will have to have another crack at it, will take some pictures next time! :Smile:
     
    Loading...