Electrical & Lights Resistor pack?

Discussion in '6th Generation (1997-2002)' started by plugin, Wednesday 9th Oct, 2013.

  1. plugin New Member Getting Started

    Hi my blower for my heaters don't work on setting 1 2 or 3 - only on setting 4, so either full blast or nothing! I read a lot on Civics having this problem and it is usually down to a resistor pack behind the glove box near the passenger footwell that needs replaced.

    Is it located in the same place for the accord 6th Generation? Is it even the same part number? I sure hope so as it looks like a dead easy job on the Civic, just hoping and praying its as easy on the accord.

    W Plate 6th Generation accord 1.8s

    Thanks
     
  2. Ichiban Founder Staff Team

    England CJ Leeds
    30,178
    6,408
    516
    Check on this site http://hondakarma.com/posts/22713/

    They will be different part number as they are different cars,they only way to make sure they are the same is to look at them.
     
    Last edited by a moderator: Sunday 23rd Feb, 2014
    Loading...
  3. synaesthesia Club Member ★ ☆ ☆ ☆ ☆

    Nick Derby
    64
    Interesting - wonder if it's the same fix as the old Civic/Rover - I had mine go on a rover 400 (Civic), and bought the parts (resistors IIRC) for around £3 total and 5 minutes of soldering. Worked a treat :Grin:
     
  4. AndyB1976 Valued Contributor ★ ★ ★ ★ ☆

    United Kingdom Andy Aberfoyle
    799
    541
    5
    **EDIT - removed incorrect info after Beefys correction**
    Item 7 maybe
    ***edit again***

    ITEM 6


    Honda Car Parts / Choose by Model / Genuine Honda Parts | Honda Cars | Honda Motorcycles | Honda Power Products | Lings Honda

    B__1711.

    1PFKL569427CLAMP, CASE HOLD£2.63(€3.00)($4.21)001Add Wish List
    2PFKL863677NUT, HOLDER£2.54(€2.90)($4.06)002Add Wish List
    3PFKL863684BUSH, LINK£2.00(€2.28)($3.20)001Add Wish List
    4PFKL863889BLOWER SUB ASSY.£343.37(€391.44)($549.39)001
    5PFKL2057437MOTOR ASSY., FAN£296.81(€338.36)($474.90)001Add Wish List
    7PFKL864088RESISTOR, BLOWER£37.26(€42.48)($59.62)001Add Wish List
    8PFKL864170MOTOR ASSY., FRESH & RECIRCULAR£154.44(€176.06)($247.10)001Add Wish List
    9PFKL983962SCREW, TAPPING, 5X12£2.60(€2.96)($4.16)002Add Wish List
    11PFKL985388SCREW, TAPPING, 5X16£2.60(€2.96)($4.16)003Add Wish List
    12PFKL985475SCREW-WASHER, 4X16£2.11(€2.41)($3.38)001Add Wish List
    13PFKL990527NUT-WASHER, 6MM (PAINT CUTTING)£3.42(€3.90)($5.47)003Add Wish List
    14PFKL1020813SCREW, TAPPING, 4X16 (PO)£0.65(€0.74)($1.04)008Add Wish List
     
    Last edited: Thursday 10th Oct, 2013
    Loading...
  5. Beefy Expert Advisor ★ ★ ★ ★ ★

    United Kingdom Stoke
    1,122
    691
    1
    It will be situated by the blower motor
     
    Loading...
    AndyB1976 likes this.
  6. AndyB1976 Valued Contributor ★ ★ ★ ★ ☆

    United Kingdom Andy Aberfoyle
    799
    541
    5
    Cheers for the pointer Beefy, updated my earlier post :Thumbup:
     
    Loading...
  7. Beefy Expert Advisor ★ ★ ★ ★ ★

    United Kingdom Stoke
    1,122
    691
    1
    7 is described as a resistor but no 6 is what I would recognise as the correct resistor due to the heatsink on top of it.
     
    Loading...
    AndyB1976 likes this.