General Window regulator.

Discussion in '5th Generation (1994-1997) [Rover 600, Isuzu Aska]' started by Accord 1994, Thursday 26th Jun, 2014.

  1. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Hi, have a Honda Accord Aerodeck 1994, need another window regulator with motor, have seen one on Ebay, it's saying for a Rover 600 / Honda Accord, asked if it would fit mine but he has not got back to me.
    Is there anyone who can answer this question please, thanks for your time!
     
  2. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Also there is a very good photo of it as well, should I strip door panel off and see if it matches, and what should I look for to know if it's compatible, thanks for your time!
     
  3. Chunkylover53 Expert Advisor ★ ★ ★ ★ ★

    Loading...
  4. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Hi, I want the front offside, the rear only goes' down half way, so I presume it would not be suitable for the front unless anyone knows different, but thanks anyway!
     
  5. Ichiban Founder Staff Team

    England CJ Leeds
    30,134
    6,389
    516
    just shoot the window channels with silicone , its needs a clean and lube.
     
    Loading...
  6. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Hi, do you mean spray silicone, thanks!
     
  7. Ichiban Founder Staff Team

    England CJ Leeds
    30,134
    6,389
    516
    Yes mate sorry ate my words.
    :telloff:
     
    Loading...
    Accord 1994 likes this.
  8. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    Thanks, Ichiban!!
     
  9. Accord 1994 Junior Member ☆ ☆ ☆ ☆ ☆

    Bruce Bournemouth
    20
    5
    I have just squirted silicone down the vertical channel of the window and an instant improvement!! Thanks Ichiban, will now oil up the moving parts, and they should fly up!!
     
    Ichiban likes this.
  10. Ichiban Founder Staff Team

    England CJ Leeds
    30,134
    6,389
    516
    Good done, not every time you need to replace bits :Niceone:
     
    Loading...
    Accord 1994 likes this.
  11. wumps Junior Member ★ ☆ ☆ ☆ ☆

    i have rover 600 regulator in my drivers door on my ce8 and fitted no problems works just fine i welded a strength bar on to it at the week point were they always buckle and break so hopefully be ok for a good few years now

    this is the one i put in as its not normally the motor that goes on em
     
    Loading...