Diesel Engine Oil Filter Replacement

CR-V 08-12 [RE6] (N22B3 i-DTEC & N22A2 i-CTDi)

  1. Ichiban
    Difficulty Level:
     
    Simple
    This guide applies to both engines.

    • Remove the oil filter assembly using the oil filter wrench (A) (P/N 04151-RBD-305 or equivalent). Use only socket type oil filter wrench to avoid damage to the oil filter cap.
    • Separate the oil filter cap and oil filter element.
    RE6  Diesel Oil  Filter change 1.PNG

    • Install the new O-rings (A) and oil filter element (B) to the oil filter cap (C).
    • Apply new engine oil around the O-rings, then install the oil filter assembly to the oil filter housing.
    • Tighten the oil filter assembly using the oil filter wrench (P/N 04151-RBD-305 or equivalent).
    Specified Torque:

    25 N·m (2.5 kgf·m, 18 lbf·ft)

    RE6  Diesel Oil  Filter change 2.PNG

    Please upload picture of an actual DIY in the discussion thread of this guide for the benefit of the community of users. thanks