Maintenance Schedule for Normal Conditions

CR-V 07-10[RE-6] (N22A2) i-CTDi

  1. Ichiban
    Maintenance Schedule for Normal Conditions - EU
    Follow the Normal Conditions Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule do not apply.
    Service at the indicated distance or time whichever comes firstkm x 1,00020406080100120140160180200220240
    miles x 1,00012.525.037.550.062.575.087.5100.0112.5125.0137.5150.0
    months1224364860728496108120132144
    Replace engine oil
    Replace engine oil filter
    Replace air cleaner elementEvery 40,000 km (25,000 miles)
    Drain fuel filter
    Replace fuel filter
    Inspect drive belt
    Look for cracks and damage, then check the position of the drive belt auto-tensioner indicator
    Replace engine coolant
    Use genuine Honda All Season Antifreeze/Coolant Type 2
    At 100,000 km (62,500 miles) or 5 years, then every 60,000 km (37,500 miles) or 3 years
    Replace Manual Transmission Fluid (MTF)
    Use genuine Honda MTF
    Every 120,000 km (75,000 miles) or 8 years
    Replace rear differential fluid
    Use genuine Honda DPFS
    At 120,000 km (75,000 miles) or 8 years, thereafter every 60,000 km (37,500 miles) or 4 years
    Inspect front and rear brakes
    Check the brake pad and disc thickness. Check for damage or cracks
    Check the calipers for damage, leaks, and tightness
    Replace brake fluid
    Use only DOT 3 or DOT 4 brake fluid. We recommend genuine Honda Brake Fluid
    Check the brake fluid level is between the upper and lower marks on the reservoir
    Every 3 years
    Check parking brake adjustment
    Check the parking brake operation
    Replace dust and pollen filter
    Replace the filter every 20,000 km (12,500 miles) or 1 year, if the vehicle is driven mostly in urban areas that have high concentrations of soot in the air from industry and diesel-powered vehicles.
    Replace the filter whenever airflow from the heating and cooling system is less than normal.
    Check lights alignment
    Test drive (noise, stability, dashboard operation)
    Check expiry date for temporary repair kit bottle (if equipped)
    Inspect vehicle corrosion:
    refer to the Body Repair Manual
    External paintwork and panel corrosion check
    Under body corrosion check
    Every year
    Visually inspect the following items:
    Check for correct installation and position, check for cracks, deterioration, rust, and leaks
    Check tightness of screws, nuts, and joints. If necessary, retighten
    Tie-rod ends, steering gearbox, and boots
    Check rack grease and steering linkage
    Check the boot for damage and leaking grease
    Suspension components
    Check the bolts for tightness
    Check all dust covers for deterioration and damage
    Driveshaft boots
    Check the boot and boot band for cracks
    Check rack grease
    Brake hoses and lines (including VSA)
    Check the master cylinder and VSA modulator-control unit and leakage
    All fluid levels and condition of fluid
    Check levels and check for leaks. If necessary, add
    Engine coolant
    MTF
    Clutch fluid
    Brake fluid
    Rear differential fluid
    Windshield fluid
    Exhaust system
    Check the catalytic converter heat shield, exhaust pipe, and muffler for damage, leaks, and tightness
    Fuel lines and connections
    Check fuel lines for loose connections, cracks, and deterioration
    Retighten loose connections and replace any damaged parts
    Tyre condition
    steve4536 likes this.

Recent Reviews

  1. Geth
    Geth
    5/5,
    great resource, thanks for posting this.
  2. Mike c
    Mike c
    5/5,
    Really useful info