MTF Inspection and Replacement

CR-V 07-10[RE-6] (N22A2) i-CTDi

  1. Ichiban
    Difficulty Level:
     
    Simple
    Park the vehicle on level ground, and turn the ignition switch OFF.
    Make sure you have the anti-theft codes for the radio and the navigation system, then write down the radio station presets.
    Disconnect the negative (-) cable first, then the positive (+) cable from the battery. Remove the battery.
    Remove the battery base (A) and the harness clips (B).
    Remove the engine undercover .
    MTF1HK CRV.PNG
    Remove the oil check bolt (A) and washer (B). Check the condition of the fluid. If the fluid is dirty, remove the drain plug (C) and washer (D).
    Install the drain plug with a new washer.
    MTF2HK CRV.PNG
    Remove the oil filler plug (A) and washer (B).
    MTF3HK CRV.PNG
    Refill the transmission fluid from the oil filler plug hole, and until the transmission fluid overflows from the oil check bolt hole (A).
    After the fluid stops overflowing, install the oil check bolt (B) with a new washer (C).
    Fluid Capacity
    2.5 L (2.6 US qt, 2.2 Imp qt) at fluid change
    3.1 L (3.3 US qt, 2.7 Imp qt) at overhaul

    Always use Honda Manual Transmission Fluid (MTF). Using engine oil can cause stiffer shifting because it does not contain the proper additives.
    MTF4HK CRV.PNG
    Install the oil filler plug (A) with a new washer (B).
    MTF5HK CRV.PNG
    Install the battery base (A) and the harness clips (B).
    Install the battery. Connect the positive (+) cable first, then the negative (-) cable to the battery.
    Enter the anti-theft codes for the radio and navigation system, then enter the customer's radio station presets.
    Do the power window control unit reset procedure .
    Install the engine undercover .
    MTF6HK CRV.PNG
    Al Star likes this.