For the details of the lubrication points and the type of lubricants to be applied, refer to the illustrated index and the various work procedures (such as Assembly/Reassembly, Replacement, Overhaul, Installation, etc.) contained in each section.
Application Specified Lubricant or Fluid A Battery terminals Multipurpose grease B Brake pedal joint pin C Clutch pedal pin D Hood hinges and hood latch E Hatch hinges F Fuel fill door (lock rod sliding area) G Release fork Molybdenum grease H Caliper piston boots Rubber grease I Caliper piston seals, caliper pins, and boots Silicone grease J Change wire end K Rear brake shoe linkage (drum brake) Rubber grease L Air conditioning compressor Compressor Oil:
SP-10 (P/N 38897-P13-003, 38898-P13-003, or 38899-P13-A01) for refrigerant HFC-134a (R-134a)
· The illustration shows the RHD model. · Lubricate the following areas using the recommended lubricants and fluids. · In corrosive areas, more frequent lubrication is necessary.