Suspension, Steering and Brakes CR-V 2004 pre-facelift petrol Bleed nipples

Discussion in '2nd Generation (2002-2006)' started by CEERVEE, Sunday 10th Jun, 2018.

  1. CEERVEE Club Member ★ ☆ ☆ ☆ ☆

    United Kingdom GEEGEE Bellshill
    27
    4
    Can anyone please confirm the bleed nipple sizes for a 2004 pre-facelift 2.0 petrol CR-V ? Having a bit of a time of it trying to bleed system after fitting a replacement master cylinder. its older car so the nipples understandably are all very rusted and seems previous owner has had a go at them few years ago as couple looking pretty rounded too.
    I have extracted driver front one which seems to be M10. I only know that as I had a spare M10 nipple (ford) in toolbox but the threaded length on mine was shorter that one removed. I plan to replace all 4 if i can get sizes confirmed and get hold of a set.
    I think front and rear may be different sizes but hard to tell. Any help greatly appreciated
     
  2. andy83 Club Veteran ★ ★ ★ ★ ★

    United Kingdom andy shropshire
    4,361
    2,762
    3
    Loading...
    CEERVEE likes this.