This is applicable to all 7th Generation Accords Before doing this test make sure of the washer nozzles are aiming correctly. When the washer fluid is sprayed, check that 50 % or more of fluid was sprayed on the shaded area (F, G). If not, adjust the washer nozzle(s). D: Approx. 130 mm from the upper end of cowl cover (A). E: Approx. 160 mm from the upper end of cowl cover (A). Washer Nozzle Adjustment Procedure Required tool A: flat tip screwdriver of the following size. B: 0.6 mm or less Insert the screwdriver (A) into the washer nozzle (B), hold the (D) part of the handle and adjust the nozzle by moving the shaft (C) up or down. NOTE: - (C) location should be close to the nozzle. - Do not move the handle (D), or the washer nozzle may be damaged.