Official Honda Honda Automobiles: Honda Vehicles at the 2014 SEMA Show

Discussion in 'News Feeds' started by Honda US News, Wednesday 5th Nov, 2014.

  1. Honda US News Club Veteran ★ ★ ★ ★ ★

    For the 2014 SEMA Show, Honda enlisted the services of six creative automotive entrepreneurs to explore the tuning potential of the all-new Honda Fit by creating their personal vision for the compact sensation. Their efforts were chronicled on where fans could vote for their favorite builds. All of these exciting new Fits are on display in the Honda booth at the SEMA Show this week. Read below for details and to see which one took home the prize as Fan Favorite in the 2015 Fit Performance Project.

    Also on display at the Honda booth are two specially prepared vehicles from Honda Performance Development (HPD), including a 2015 Fit B-Spec concept race car, and a very special CR-Z built by HPD to pace the IndyCar racing series.

    Honda is also showcasing a Dallara IndyCar chassis—powered by Honda—just like the car driven by Ryan Hunter-Reay to victory at this year's Indianapolis 500 race.

    Please note: All modification information listed was provided by the vehicle builders and has not been confirmed by American Honda Motor Co., Inc. The modifications to these vehicles may void the manufacturer's warranty, may not be legal for street driving in all 50 states and have not been specifically suggested, recommended or approved by American Honda Motor Co., Inc.

    Bisimoto 2015 Honda Fit Turbo


    Bisimoto Engineering is known worldwide for awe-inspiring street, show and race vehicles. With no fear of the unknown, Bisimoto is always on the cutting edge of automotive technology. The Bisimoto 2015 Honda Fit "T" was no exception with 16 new parts designed for the new L15B twin cam engine and chassis, with the very best in performance and reliability. This fully functional turbocharged "Fit for you" was built to the tune of 480 Horsepower (410.6whp).

    Powertrain Modifications:

    • AEM Electronics
      • Infinity 6 ECU
      • Boost controller and Fuel Pressure Regulator
    • Arias Pistons
    • ARP Headstuds and Bolts
    • Bisimoto Springs and Titanium Retainers
    • Bisimoto-Web Level 2.4 Camshaft
    • Bisimoto 360 degree Oil Cap
    • Bisimoto Cat-Back Exhaust System
    • Burns Stainless Muffler and hardware
    • Deatschwerks 1000cc Injectors
    • Golden Eagle Sleeves & Intake
    • Bisimoto MLS Gasket
    • Bisimoto Intake Heat shielding gasket
    • AEM 320LPH E85 Fuel Pump
    • NGK Iridium Spark Plugs
    • PurOl "Elite Series" Synthetic Motor Oils
    • Portflow Custom Headwork
    • Kinsler Fuel Rail & filter
    • R&R Steel Rods
    • Racepak IQ3 Dash
    • Rogue Racing heavy duty race harness
    • Turbonetics TNX-20 Turbo
      • Wastegate
      • Blowoff Valve
    • Vibrant Vanjen Clamps and Stainless Steel Hardware
    • TurboHot Coatings
    • Action 2MS clutch
    Chassis/Suspension Modifications:

    • Bisimoto 5 lug Conversion
    • BuddyClub 17x7.5" F91 Wheels & Lugnuts
    • BuddyClub 4 pot big brake kit
    • Bisimoto Brake mounts
    • Toyo R888 Tires
    • Progress Coilover suspension & Sway Bars
    Exterior Modifications:

    • Denmatic Design Scheme
    • Honda Genuine Accessories
    • RS Wing
    • Rhythms Powdercoating
    • Spearco Intercooler
    • Driftmotion aluminum piping
    • Extreme Autoworx Paint
    Interior Modifications:

    • Bisimoto Reservoir Socks
    • BuddyClub Short shifter
    • G&J Braided Plumbing
    • Buddy Club Racing Seat
    • Crow Seat Belt

    Bisimoto 2015 Honda Fit Spec Car


    Bisimoto Engineering is known worldwide for awe-inspiring street, show and race vehicles. With no fear of the unknown, Bisimoto is always on the cutting edge of automotive technology. This "track ready Fit" is the perfect cost effective Spec-racer, with a unique high flow Bisimoto Exhaust Pulse Chamber, custom valved performance suspension and aerospace derived automotive lubricants. Power is 151 horsepower to the crank (129whp).

    Powertrain Modifications:

    • Bisimoto Exhaust Pulse Chamber System
    • Bisimoto MLS Gasket
    • NGK Iridium Spark Plugs
    • PurOl "Elite Series" Synthetic Motor Oils
    • TurboHot Coatings
    • Action 1MS clutch
    Chassis/Suspension Modifications:

    • BuddyClub 17x7.5" P1 Racing Wheels
    • Buddy Club Forged Racing Lugnuts
    • Toyo R888 Tires
    • BuddyClub Racing Coilover Suspension system
    Exterior Modifications:

    • Denmatic Design Scheme
    • Extreme Autowerks Wrap
    • Honda Genuine Accessories
    • Rhythms Powdercoating
    Interior Modifications:

    • Bisimoto Reservoir Socks
    • Buddy Club Short Shifter

    HPD 2015 Honda Fit B-SPEC Concept Race Car


    Built for SCCA club racing, World Challenge, and Canadian Touring Car B-SPEC rules, this Fit has been developed by HPD to be raced in 2015. Designed to be an entry-level category, the B-SPEC class features showroom stock racing cars utilizing stock engines and chassis, fitted with competition roll cages, racing seats and other safety equipment; and manufacturer-approved suspension components, tires and wheels.

    Powertrain Modifications:

    • HPD air filter
    • HPD air-conditioning delete belt
    • HPD stainless steel cat-back exhaust
    Chassis/Suspension Modifications:

    • HPD coil over kit with race springs
    • HPD coil over kit with race springs
    • HPD braided stainless brake line set
    • Front brake pads
    • TR Motorsports C1 wheels with BFG R1 racing tires
    Exterior Modifications:

    • Wrap by One 11 Ink
    Interior Modifications:

    • Sparco racing seat
    • Sparco racing steering wheel and quick release
    • Schroth driver restraint harness
    • 6-point roll cage

    HPD Supercharged CR-Z IndyCar Series Pace Car

    (Photo not available at press time)

    HPD built this high-performance CR-Z to showcase the effectiveness of its line of performance parts for the CR-Z in a most demanding role—pacing the 2014 IndyCar racing series.

    Originally addressing demand for a higher-performance CR-Z, HPD expanded on an earlier CR-Z engine concept to create the supercharger package, as well as chassis and body components. HPD's enhancements to the CR-Z improve acceleration, turning and stopping by supercharging the engine with a sport exhaust, developing a sport suspension, designing wheels with high performance tires, and adding sport brakes.

    Powertrain Modifications:

    • High efficiency centrifugal supercharger
    • HPD air to air intercooler
    • High flow injectors
    • ECU calibration to meet LEVII SULEV & AT-PZEV regulations with 91 octane fuel
    • HPD air filter system
    • 197 hp @ 6,250 RPM
    • 176 lb.-ft. torque @ 5,150 RPM
    • HPD sport exhaust with center dual outlet
    Chassis/Suspension Modifications:

    • HPD sport dampers
    • HPD coil springs with lower ride height
    • HPD 300 mm diameter disk brakes with 4 piston aluminum calipers
    • HPD 18" x 7.5" aluminum sport wheels
    • Michelin Pilot Super Sport 215/40R18 89Y tires
    Exterior Modifications:

    • Honda Accessory front lip spoiler
    • Honda Accessory tailgate spoiler
    • HPD rear diffuser
    • HPD badge
    • HPD CR-Z graphics

    Kenny Vinces 2015 Honda Fit


    Feeling the Fit had been neglected by tuners, Kenny Vinces' mission with his build was to showcase the 2015 Fit as a great platform for the tuner world. The 2015 Kenny Vinces Honda Fit was built with the up-and-coming builder in mind but at the same time caters to everyone by using parts that are affordable but also include the desired wow factor. Virtually every aspect of the Fit was modified yet the build still keeps the Honda's sleek lines inside and out.


    • 1.5L Honda L15B Earth Dream i-VTEC Engine
    • Fulltime Fabrication Custom Forward Facing/Front-Mount Turbo Kit
    • BorgWarner EFR6258 Turbocharger w/ Velocity Stack
    • Fulltime Fabrication Custom Intake Manifold, Side Dump Tube, Exhaust
    • Vibrant 2.5" Intake and 3" exhaust tubing
    • Tial 44mm MVR Wastegate and BOV
    • Fulltime Fabrication Custom Cooling and Mounts
    • Espos Power Coating
    • Ceramic Coated Exhaust, Dunk Tube, Exhaust Manifold, Downpipe
    • Custom Silver Valve Cover
    • Downstar Billet Oil Cap and Engine Dress Up Kit
    • Nitrous Express 4 Fogger Piranha direct port System and N-Tercooler Sprayer
    • 2 -Nitrous Express 5lb Bottle
    • AMSOIL Z-Rod 20w/50 Synthetic Motor Oil

    • BASF R-M Diesel Smoke Paint and R-M DC5335 Glamour Clear
    • Kenny V. Front Lip Spoiler and Custom Side Skirts, and Carbon Fiber Elements Duckbill Wing
    • Custom Molded ABS Rear Diffuser
    • Willy Custom Fiberglass Pocket Flares
    • Custom Carbon Fiber Elements Fog Light Covers, OEM Truck Garnish, Front Grill, Hood Garnish
    • Custom Molded ABS Rear Diffuser
    • Areocatch Hood Latches
    • JDM Red Honda "H" Badges
    • Honda Genuine Accessories Window Visors

    • TAKATA Racing Narrow Race Pro LE FIA 23lb. Racing Bucket with Slider (driver side)
    • TAKATA Racing WIDE Race Pro LE FIA 23lb. Racing Bucket with Sliders (passenger side)
    • Custom Red Leather Wrapped with Black Stitching: Front seats, Shift boot upholstery, Armrest, Door Panel inserts, JDM Lonza Passenger foot rest plate, and Rear Seat
    • TAKATA Racing Race 4 bolt camlock belts (driver side)
    • TAKATA Racing Drift 3 bolt street legal belt (passenger side)
    • Mugen Pedals
    • Downstar Shift :tut:
    • 4 Point Roll Cage built by Victor Peña with Dual 5lb NX Bottle Mounts
    • BASF R-M CZZ-300 Silver Painted Door Panels and Roll Cage
    • Custom Black Suede Headliner, Shade and Sun visors
    • Custom Black dyed A, B, C, and D Pillars
    • Honda Genuine Accessories Door Sills
    • Kenny V. Fiberglass door panels w/ Kicker 6 ¾" KS667 Components

    • 17x9 XXR531 Custom Powder Coated Red (front)
    • 205/40/17 Toyo Proxes R888 (front)
    • 17x10 XXR531 Custom Power Coated Red (rear)
    • 235/40/17 Toyo Proxes R888 (rear)

    • WP Pro Brakes L6 Caliper 12.3" Sawblade Rotors (front)

    • Lightwerkz retrofitting OEM Headlights
    • The Retrofit Store D2S 3.0 Projectors, Apollo 1.0 Chrome Projector Shrouds, Morimoto D2S 6000k HID Bulbs, Morimoto D2S 35w HID Ballast, Morimoto H4 MotoControl Wiring Harness

    Kontrabrands A.M.L. (Active Metropolitan Lifestyle) 2015 Honda Fit


    A Honda Fit for an active metropolitan lifestyle. Great for any occasion whether it's commuting, sporty driving, a night out on the town, or a relaxing weekend. The 18" SSR Professor SP1 wheels and custom R-M paint really make the exterior pop. TEIN coilovers and Falken tires help the Fit hug the road while the Greddy exhaust system frees up additional horsepower. The interior is sporty yet plush with Sparco R100 reclining seats and custom upholstery. Upgraded Clarion audio components bring music to life and retain all the functions of the factory 7" audio display. A Greddy Fixie bicycle attaches to a custom Design Craft Fabrication removable slide-out bicycle holder.

    Powertrain Modifications:

    • Greddy 2.5" full cat-back stainless steel exhaust system
    Chassis/Suspension Modifications:

    • TEIN Street Flex coilovers and EDFC Active Pro with GPS sensor
    • Wilwood Forged Dynalite front brake kit with 4-piston calipers and 12.2-inch drilled and slotted rotors
    Exterior Modifications:

    • DTM Autobody complete color change and body work
    • R-M Paint – Moulin Rouge
    • Mugen front lip spoiler and side skirts for JDM Fit
    • SSR Professor SP1 wheels in S.B.C. (Super Black Coat)
      • Front: 18" x 7.5" +42 (NR Disk); Rear: 18" x 7.5" +43 (SL Disk)
    • SSR GT forged lug nuts in red
    • Falken FK453 tires—front and rear: 215/35-18
    • Mothers Car Care Products
    • Honda OEM rear mud guards
    Interior Modifications:

    • Sparco R100 reclining front seats
    • Custom interior upholstery
    • Sparco REFLEX SHRT pedal set
    • Design Craft Fabrication custom bicycle mount
    • Greddy Fixie bicycle
    • Clarion audio components:
      • 260W 6.5" coaxial 2-way front and rear door speakers
      • Micro size 4-channel full range amplifier
      • 150W amplified subwoofer, low profile
    • Mugen shift :tut:

    MAD Industries 2015 Honda Fit


    This aggressively designed Honda Fit is completely painted in BASF R-M Waterborn System jet black and custom charcoal with gold accents. The bold cockpit compliments the charcoal and gold exterior accents with Katzkin Tuscany leather seat covers with perforated raven inserts and charcoal contrast stitching in the seats and door panels. Eibach Pro Kit performance springs set the aggressive stance on 19-inch "rotiform" IND-t wheels with Pirelli P Zero performance tires. MAD Industries, ComposiMo and Honda Power Sports teamed to pump up the wow factor with a fully customized matching Honda Grom that neatly fits inside the Fit with room for gear.

    Powertrain Modifications:

    Chassis/Suspension Modifications:

    • Eibach Pro Kit performance springs drops the Fit 1.5" for extreme enthusiasts
    • MGP brake caliper covers in custom charcoal with MAD logo
    • Pirelli P Zero Nero tires; 225/35ZR19
    • rotiform: 19"x8" directional IND-t two-piece forged wheels
    Exterior Modifications:

    • BASF Waterborn System - Jet black and custom charcoal with gold details
    • PIAA Plasma Yellow fog lamp H11 bulbs
    • Madico specialty window film in custom gold to tie in with exterior theme
    • LightWurkz custom matte black headlamp housings with color matched trim; Custom LED DRL system; LightWurkz Bi-Xenon projector lamps with custom-built shrouds; 6000K HID system with harness
    • Painted By LGE-CTS
    Interior Modifications:

    • Katzkin Leather Interiors: Midnight Tuscany leather with Raven Black perforated Suedezkin inserts and charcoal contrasting stitching that lend a luxury look to the seats; Bone Suedezkin with Tuscany accents for door panel inserts
    • Headliner, pillars and package tray are covered in Bone and UltraFabrics low sheen material
    • BASF R-M Waterborn System paint was used to match exterior accents
    • Rockford Fosgate Punch Audio System, PBR300X4, PSD-10; P152 speakers
    • SRP Racing pedals: Billet aluminium, anodized
    • MACs Straps has outfitted the Fit with motorcycle tie downs with soft loop pack and direct-hook cam ratchets with 4-point anchor plates
    • Tera LED dome light bulbs

    2015 Honda Grom Modified by MAD Industries and ComposiMo Fabrication

    (Photo not available at press time)

    This highly modified Honda Grom was customized to match the MAD Industries Honda Fit and actually fits inside the Fit. The Grom is custom painted with BASF Deep Black and charcoal paint with matching custom gold wheels shod with Pirelli tires.


    • ComposiMo slip-in stretch kit and 6.5-inch rear lowering link
    • ComposiMo RaceBarZ handlebars with Woodcraft Racing clamp components
    • ComposiMo scooter-style front fork adapters and billet aluminum gas cap
    • ComposiMo throttle body clocking flange
    • ComposiMo TriPleX light brackets with Rigid Industries SR2 Hyper Driving Lights
    • Woodcraft Racing rear sets
    • Brocks Performance Alien-Head exhaust and Performance SF air filter
    • MNNTHBX frame side cover, LED tail light, and cam/tappet covers
    • Pirelli tires: 120/70-12 front & 140/60-12 rear
    • Rigid Industries A-Series LED accessory lights
    • Brembo front and rear brake calipers provided by Makoa Scooters
    • Front forks provided by Makoa Scooters
    • Paint By LGE-CTS / MAD Industries
    • Upholstery by MAD Industries

    Spoon Sports Super Taikyu 2015 Honda Fit


    Spoon Sports USA is a pioneer in Honda tuning and racing. The Spoon Sports Super Taikyu 2015 Honda Fit was designed with endurance racing in mind, built with an emphasis on efficiency, reliability, and driver comfort. Using endurance racing as a test-bed, Spoon Sports develops and produces a wide range of tuning parts for Honda cars, many of which are featured and tested on this car.

    Powertrain Modifications:

    • Spoon Sports Air Cleaner
    • Spoon Sports Intake Manifold
    • Spoon Sports Low Temp Thermostat
    • Spoon Sports Magnetic Drain Bolts
    • Spoon Sports Oil Filler and Radiator Caps, and Reservoir Covers
    • Spoon Sports Spark Plugs
    • Spoon Sports Super Taikyu Titanium Exhaust
    • Spoon Sports Venturi Throttle Body
    • Spoon Sports Yellow Valve Cover
    • Kinetic Custom Machine Lithium Battery Tray
    Chassis/Suspension Modifications:

    • Spoon Sports Brake Lines and Brake Pads
    • Spoon Sports Prototype Full Monoblock Calipers
    • Spoon Sports Prototype Full Spec Dampers
    • Spoon Sports Subframe Rigid Collars
    • Spoon Sports USA One-Off Front Rotors
    • JDM Honda Genuine Rear Disc Brake Conversion and Rear Subframe
    Exterior Modifications:

    • Spoon Sports Aero Mirrors
    • Spoon Sports Wheel Nuts
    • Spoon Sports Windshield Wipers
    • Spoon Sports USA One-Off Carbon Kevlar Sunroof Delete
    • JDM Honda Genuine Fit RS Front Bumper, Side Skirts, Rear Bumper, Roof Spoiler, Front Grill and Emblems
    • JDM Honda Genuine LED Projector Headlights, LED Front Marker Lights, and Tail Lights
    • ASM Dry Carbon License Plate, Short Antenna, and Titanium License Plate Bolts
    • Rays Volk Racing CE28 Club Racer Wheels F:15x7+10 R:15x7+28
    • Yokohama ADVAN 190/580-15 Slick Tires
    • PPG Paint by Signature Autobody
    Interior Modifications:

    • Spoon Sports Blue Wide Rear View Mirror
    • Spoon Sports Carbon Bucket Seats
    • Spoon Sports Shift :tut:
    • Spoon Sports Steering Boss
    • Spoon Sports Steering Wheel
    • Spoon Sports Super Taikyu Roll Cage
    • Spoon Sports USA One-Off Carbon Door Panels
    • Takata Racing Seat Belt Harnesses

    Kylie Tjin Special Edition 2015 Honda Fit

    Voted the Fan Favorite in the 2015 Fit Performance Project


    After having built two previous Honda Fit's for the SEMA show, designer Tjin Edition knew that for their third installment they had to pull out all the stops for their Unique Fabrication built Fit. Following their signature build style, but wanting to add some flavor and flare to the build, Tjin Edition's goal was to build the ultimate street Fit but with a wide and aggressive stance. To accomplish their goal, The Kylie Tjin Special Edition Fit has a custom metal wide body, one off paint job by L&R Autobody, lowered stance, and aggressive wheel and tire combo.


    • Custom metal fender flares by Josh Freeman
    • Custom Axalta paint job by L&R Auto Body
    • Coplus headlights
    • Coplus foglights
    • Coplus front lip
    • Athentic Japanese red H emblems
    • Webasto Sunroof
    Wheels and tires:

    • 18" iForged wheels (brushed and gunmetal finish with -35 offset)
    • 18" Falken tires (215/35/18 FK453s)
    Brakes and suspension:

    • Baer front big brakes
      • 6 piston calipers (Hot Pink Kylie Tjin Edition)
      • 14" rotors
      • Custom brackets and brake lines by Unique Fabrication
    • Airrex air management and air suspension

    • Bisimoto pulse chamber

    • Custom Katzkin interior
      • front seats
      • rear seats
      • door panels
      • center consol
    • SoCal Eilte 94Fifty basketball and sporting equipment
    • Scosche magic mount

    • Sony Audio
      • subwoofer
      • amplifiers
      • mids and highs
    • Optima battery
    • Scosche audio wiring

    Andretti Autorsport DHL Indianapolis 500-Winning IndyCar (replica)


    Honda-powered Ryan Hunter-Reay won the 98th running of the Indianapolis 500 at the Indianapolis Motor Speedway, edging Helio Castroneves by six hundredths of a second in the second-closest finish in "500" history. Hunter-Reay's victory was the first Indy 500 triumph in his IndyCar career. This DHL livered show car was prepared by Andretti Autosport for display in the lobby of Honda Performance Development.

    Dallara DW12


    • Engine Type: Turbocharged V6
    • Displacement: 2.2L (134.25 cubic inches)
    • Valve Train: Dual overhead camshaft, four valves per cylinder
    • Crankshaft: Steel alloy, four main bearings
    • Pistons: Aluminum alloy
    • Connecting Rods: Machined steel alloy
    • Engine Management: McLaren Electronics
    • Lubrication: Dry sump
    • Cooling: Single mechanical water pump

    HPD HI13RT IndyCar Engine


    • Engine Type: Turbocharged V6
    • Displacement: 2.2L (134.25 cubic inches)
    • Valve Train: Dual overhead camshaft, four valves per cylinder
    • Crankshaft: Steel alloy, four main bearings
    • Pistons: Aluminum alloy
    • Connecting Rods: Machined steel alloy
    • Engine Management: McLaren Electronics
    • Lubrication: Dry sump
    • Cooling: Single mechanical water pump

    Source: Honda World News