I've replaced the front discs on my 2000 Accord no problem. Started on the rear today after watching a couple of youtube clips. This time I expereienced some issues. I undid the 13mm bolts and got the old pads out OK but then struggled with the bolts holding the caliper mounting frame to the exle. 1. What size are these bolts? None of my metric sockets seemed a tight fit. Are they A/F? 2. I suspect I have rounded the head on at least one bolt. Any suggestions please? For example, is there a near fit socket in A/F or other type which can be hammered on? 3. Winding back the adjuster in the caliper was an absolute b*gger. Any suggestions to make it easier? 4. |Do the slots on the adjuster have to engage with the raised tab on the pad when re-assembling?