Engine & Gearbox Type-S Gearbox/engine mount

Discussion in 'Honda K-Series' started by k20a3, Tuesday 28th Jul, 2015.

  1. k20a3 Club Member ★ ☆ ☆ ☆ ☆

    Hi All,

    Just wanted to ask a question please. Looking at online Honda diagrams the engine mount which supports from the top of the gearbox :

    engine mounts diagram EV1.

    Its part Number 1 in the above diagram.

    The rubber mount has a small split in it and I am going to replace it for a new one. The part is expensive from Honda coming in at about £112. The one off the Type-R is about £30 cheaper! also other people make them and so they can be had cheaper :Smile:

    Online with Honda the Type-R mount is shown as a different part number which suggests that it may be different. Does anybody know it the Type-R bush will fit the Type-S? I realize that they use different gearboxes perhaps that's the problem.

    Any suggestions would be helpful please. Thanks
  2. Ichiban Founder Staff Team

    England CJ Leeds
    It like with everything you have to try it to see if it works, I would get the correct engine mount and do it once and be done with it.
  3. k20a3 Club Member ★ ☆ ☆ ☆ ☆

    Yes, fair enough. Best to do it properly.
  4. k20a3 Club Member ★ ☆ ☆ ☆ ☆

    Forgot to update this sorry! I bought a Type-R mount and it fits perfectly!
    Just so anyone in the same position knows :Smile:
    SpeedyGee, andy83 and honda_saj like this.
  5. honda_saj Senior Member ★ ★ ☆ ☆ ☆

    United Kingdom saj east london
    That's good to know

    sent using tapatalk
  6. SpeedyGee Administrator Staff Team

    England Speedy Birmingham
    Good to hear! Thanks for reporting back @k20a3 :Thumbup: